We are manufacturing and exporting toxic gas detector. The rugged, low maintenance TX100 series transmitters for CO, CL2 and other toxic gases, are integral with sensor and provide 4-20mA signal that is compatible with any 4-20mA control system (DCS, PLC,and Synergy ST100 controllers etc)

Specifications

• Low maintenance. Accurate & reliable performance eliminate false alarm.
• Rugged,durable,die cast IP65 transmitter with sensor
• Easy wiring connection during installation & decommissioning
• 2 years operational life
• Sensor and circuitry intergrity
• LED indication (option)
• Swiss sensor technology
• Wide supply voltage range 12 to 36 VDC for industry standard compatibility.

Applicable for :
CO,NH3,CL2,H2S,H2,HCl,O3 etc.

We provide a wide assortment of explosion proof gas detector such as TX 100 EXD, which are engineered from finest quality raw material. These explosion proof gas detector are available with long life sensors, our range is highly acclaimed across the national and international market for reliability accuracy, high performance and elimination of false alarms. Ready to use for any DCS, PLC and synergy controller our array offers easy operation, maintenance and installation. Specifications:

• Linear 4-20mA output
• International standard field proven industrial sensors
• Easy to replace sensor at the field - plug in module
• Enclosure Suitable in hazardous areas certified by approved laboratory Ex-d, IIA & IIB as per IS: 2148, and Div-1 & 2 as per IS: 5572.

We are offering hydrocarbon gas detector. Synergy TX-100EXD - IR uses Gold series range of hydrocarbon gas detector or infrared sensor. Requiring only a DC power supply and embedded software necessary to drive the sensor to extract the signal and convert them into a linearized analog output proportional to gas concentration. Specifications:

• Requires only a DC power supply to test gas to enable full sensor evalution.
• High resolution 12 bit A-D converter.
• PC software provides data logging facility
• 4-20mA analog output, 10 bit, with current limit and polarity protection
• Pushbutton operation and onboard LCD for simple setup and calibration.
• Data collection mode and RS232 data output facility remote monitoring and data logging
• Polarity protected input signal 12-30V DC 70mA DC supply
• Enclosure IP 65, Exd IIA & IIB

We are manufacturing and exporting portable gas monitor. The Synergy Model TX -100 IR Portable or Continuous Analyzers have been designed for accuracy, reliability, ease of use and ease of service, providing a detailed analysis of CO2 composition in a variety of applications from 0 to 1000 PPM or 0 to 100% range Application: These portable gas detector are used for checking CO2 content of mushroom growing rooms, incubators, CO2 in natural gas, C/A storage rooms, welding gas mixtures, CO2 purity and other process applications.

We are manufacturing and exporting multi gas monitor. Our range of multi gas monitor and detectors are available with following application and features: Applications: For simultaneous analysis and alarm of up to 8 of any combination of O2 deficiency, CO, CO2, NO, NO2, N2O,SO2, Cl2, H2S,HFC, HC,CH4, NH3, H2, LEL combustibles, % RH and temperature of ambient air. SF6 and PFC single component. Features:

• All gas detectors contained in either wall mounted or portable enclosure
• Separate gas detectors for each gas
• 4 x 20 Character scanning LCD display
• Built in sampling pump
• Dual common alarm points for all gas with common alarm lights and common audible alarm.
• Audible alarm reset button provided.
• Common Alarm contact for Hi or Lo
• RS 485 & printer output
• Datalogging software
• 110/230 or 12/24 VDC operation

Features:

• Proprietary Infrared(NDIR) gas sensor.
• Measure gas concentration of CO,HC,CO2,O2,NO simultaneously.
• LCD display.
• Air/fuel ratio calculation and display automatically.
• English display screen,easy operation.
• Oil temperature and RPM interface.
  
• RS-232C interface and optional software.
• OBD2 function optional.

Specifications:

• Advanced MCU control with low power consumption
• Adjustable calibrating level
• High concentration protection for combustible gas
• Self test for the combustible gas sensor
• Replaceable sensor module
• Visual and audible alarm with vibration
• Advanced self-examination and self-renovation function
• Password management to avoid wrong operation With Explosive proof housing

Features:-

• Natural diffusion sampling method and high-sensitivity sensor, with high sensitivity and repeatability
• 32-bit built-in MCU, high reliability and self-adaptation ability
• Full functions, easy operation
• CSTN colorful LCD, more intuitionistic, abundant and clear indication
• Compact design, easy carrying
• High strength engineering plastics and compound anti-slippery rubber; high strength, water-proof, dust-proof and explosion-proof

Specifications:-

• Gas sampling method: Natural diffusion
• Gas sensor type: Catalytic and electrochemical
• Detecting gas: Combustible gas, H2S, CO, O2
• Accuracy: ≤±5% F.S.
• Response Time: ≤30s
• Indication: LCD displays real-time and system status
• LED, audio and vibration alert for gas leakage, fault and low voltage
• Power Source: DC3.6V Li-on battery, 1800mAh
• Charging time: ≤ 6h
• Working time: ≥ 8h continuously (without alarming)
• Gas Sensor Life: 2 years
• Explosion-proof grade: Ex ibd IICT3
• Protection Grade: IP65

Applications:-

• Oil&Gas, Steel refinery Industry
• Coal Mine
• Communication, Chemical
• Underground Coal Mine, Pipeline, and Explosive area

Features:

• Advanced 16 digit MCU control
• Large LCD display
• Built-in pump to sampling, could sample test from long distance
• Low and high alarm can be specified display alarm type
• Display STEL and TWA level
• Supply time and remain battery level display
• Replaceable sensor module
• 2000 pieces records, including peak value, type, could auto cover when it full
• Could connect with computer and output data, and analyses the results
• Two alarming level, three ternary alarming (visible audio and vibration)
• Power on and self-test function, sensor, visible, audio and vibration information
• Password management and password validation for important operation

Specification:-

• Safe degree: Intrinsically safe
• Sampling: pump sampling
• Sensor: Catalytic or electrochemical
• Gas: Combustible or toxic gas
• Response time:T<30s
• Operating condition:Temperature -40℃-70℃ for combustible gas
• Temperature: -20℃-50℃ for toxic gas
• Humidity: < 90%RH non-condensing
• Battery: DC3.7V, 2.1AH, Li battery
• Working time: 8 hours continuously for catalytic gas sensor
• 48hours continuously for electrochemical gas sensor
• Charging time: 4 to 6 hour

Features:-

• Colorful screen indication
• Excessive high level protection
• Replaceable sensor module
• Self-adjustment function
• Intrinsically-safe &explosive-proof

Specifications:-

• Sensor: Catalytic or electrochemical
• Detecting Gas: Flammable Gas, H2, CO, H2S, O2, etc.
• Alarming: Can be specified
• Accuracy: ±5% F.S
• Response Time: <30s
• Indication: Audio, Visual, Vibration alarm,
• Working Condition: Tem. -40℃ to 70℃; Humidity - 90%RH
• Working Voltage: DC3.6V Li-ion battery & 1200mAh
• Charging Time: 3h to 5h
• Working Time: ≥8h continuously
• Life of Sensor: 2 years
• Protection Degree: IP65
• Weight: 200g (Battery included)
• Dimension: 110mm×60mm×40mm

Brief Introduction:-
TXP-100 portable gas detector (hereinafter called detector) is a new type of detector for detecting gas leakage from the gas pipelines, gas valve, and other possible places. With imported high quality semi-conductor sensor and embedded microcontroller , it has very high sensitivity, excellent man-machine operation interface and various adaptive ability.
The housing of the detector is made of high strength engineering plastics and compound anti-slip rubber. It is waterproof, dustproof, and with good handle.

Features:-

• MCU control, low consumption
• High resolution STN LCD
• Adjustable sensitivity
• Low battery alert , Intrinsically safe design

Specifications:-

• Detection range: (0-10000) ppm (for CH4)
• Target gas: Combustible gas
• Response time: T<5s
• Indication way: LCD and digital indication
  Audible indication
• Working condition: Tem.: -20℃ to 60℃;
  Hum.: <95%RH No con.
• Working voltage: DC3.6V / 2100mAh Lion battery
• Charging time: 4h to 6h
• Working time: 12h-70h
• Life of gas sensor: 2 years
• Weight: apprx. 300g (battery included)
• Dimensions: 170mm×77mm×33mm